Official supplies of equipment
and components from Europe

sales@famaga.us

Email for inquiries

USA

+1 (929) 235 1224

Miami

+1 (929) 235 12 24

Headquater is in
the centre of Europe

Warranty is up
to 12 months

Best
prices

Savings varies
from 15 to 55%

Shipping
worldwide

All shipments
are insured

Free
shipping

Kipp: Product catalogue - Page 154

FAMAGA always strives to provide the best prices and timings of supplies for its customers. We sell only original equipment and spare parts, although we are not always the official distributor or manufacturer's dealer. All displayed trademarks and part numbers are the property of their respective owners.

SWIFT Wire Transfer

ZENTRIERSPANNER SECHSKANT, FORM:B, CENTRING CLAMP HEXAGON, FORM:B STEEL, D, =54,5, D=70,5,

FEDERNDES SEITENDRUCKST., STANDARD LATERAL SPRING PLUNGER WITHOUT SEAL, D1=6 D=10 ALUMINIUM, COMP:STEEL, D2=10, L1=11

MUTTER FÜR T-NUT M12 EDELSTAHL, BLANK, NUT FOR T-SLOT M12 STAINLESS STEEL,, BRIGHT, DIN 508, BT=14,

KUGELDRUCKSCHRAUBE OHNE KOPF M08, BALL-END THRUST SCREW WITHOUT HEAD M08,, FORM:B CARBON STEEL, COMP:BALL-BEARING, STEEL L2=30,3

KUGELDRUCKSCHRAUBE OHNE KOPF M16, BALL-END THRUST SCREW WITHOUT HEAD M16,, FORM:BV STAINLESS STEEL L2=35,

DRUCKSCHRAUBE M12X82,5 STAHL, THRUST SCREW M12X82,5 STEEL, COMP:BRASS, ,

GEWINDEEINSATZ VOLLKÖRPER STAHL, M24x1,5 THREADED INSERT FULL BODY STEEL, M24x1,5, ,

STELLRING DIN705, FORM:E GEWINDESTIFT SHAFT COLLAR, FORM:E STEEL, DIN705, 40X63, B=18,

KLEMMHEBEL GR.3 M10X25, KUNSTSTOFF CLAMPING LEVER SIZE:3 M10X25 PLASTIC,, BLACK GREY RAL7021, COMP:STAINLESS STEEL,

KLEMMHEBEL MIT DRUCKKNOPF GR.2 M06X40 CLAMPING LEVER WITH PUSH BUTTON SIZE:2, M06X40 PLASTIC, RED RAL3020,, COMP:STAINLESS STEEL, COMP:BLACK GREY

FLÜGELGRIFF M06X40 A=50, H=24, FORM:L, WING GRIP M06X40, A=50 THERMOPLASTIC,, BLACK GREY RAL7021, COMP:STEEL,, COMP:RED RAL3020

VIERSTERNGRIFF FLACH M10X30 D1=76,2 PALM GRIP FLAT M10X30, FORM:L, THERMOPLASTIC, COMP:STEEL, D3=76,20,

PENDELAUFLAGE MIT O-RING M10X30, FORM:P SELF-ALIGNING PADS WITH O-RING M10X30,, FORM:P CARBON STEEL, ADJUSTABLE,, COMP:POLYURETHANE, SW=17

AUFLAGEBOLZEN M10 H=40, FORM:B REST PAD M10 H=40, FORM:B CARBON STEEL,, T=17,

GELENKFUß, D=16, H=21, SW=13, SWIVEL FOOT M08 D1=16 H=21 FREE-CUTTING, STEEL, SW=13,

MONTAGESCHLÜSSEL, VPE=1 ASSEMBLY KEY, PU=1, ,

FEDERNDES DRUCKSTÜCK STANDARD SPRING PLUNGER WITH HEAD D=M08 L=21, FREE-CUTTING STEEL, COMP:BALL STEEL,, PU=10

ARRETIERBOLZEN MIT RASTNUT GR.4 M16 INDEXING PLUNGER SIZE:4 M16 STEEL,, BLUE-PASSIVATED, D=10,

ARRETIERBOLZEN MIT RASTNUT GR.2, FORM:M INDEXING PLUNGER SIZE:2, FORM:M, STAINLESS STEEL, NOT HARDENED,, COMP:THERMOPLASTIC, D1=14, D=6

ZENTRIERSPANNER SECHSKANT, FORM:B, CENTRING CLAMP HEXAGON, FORM:B STEEL, D, =70,5, D=86,5,

FEDERNDES SEITENDRUCKST., STANDARD LATERAL SPRING PLUNGER WITHOUT SEAL, D1=6 D=10 ALUMINIUM, COMP:STEEL, D2=10, L1=11

MUTTER FÜR T-NUT M14 EDELSTAHL, BLANK, NUT FOR T-SLOT M14 STAINLESS STEEL,, BRIGHT, DIN 508, BT=16,

KUGELDRUCKSCHRAUBE OHNE KOPF M08, BALL-END THRUST SCREW WITHOUT HEAD M08,, FORM:B CARBON STEEL, COMP:BALL-BEARING, STEEL L2=50,3

KUGELDRUCKSCHRAUBE OHNE KOPF M16, BALL-END THRUST SCREW WITHOUT HEAD M16,, FORM:BV STAINLESS STEEL L2=50,

GEWINDESTIFT MIT DRUCKZAPFEN M06X24, GRUB SCREW WITH THRUST POINT M06, STAINLESS STEEL, DIN6332, L1=30,

GEWINDEEINSATZ VOLLKÖRPER STAHL, M30x2 THREADED INSERT FULL BODY STEEL, M30x2, ,

STELLRING DIN705, FORM:E GEWINDESTIFT SHAFT COLLAR, FORM:E STAINLESS STEEL,, DIN705 40X63, B=18,

KLEMMHEBEL GR.3 M10X30, KUNSTSTOFF CLAMPING LEVER SIZE:3 M10X30 PLASTIC,, BLACK GREY RAL7021, COMP:STAINLESS STEEL,

KLEMMHEBEL MIT DRUCKKNOPF GR.2 M06X50 CLAMPING LEVER WITH PUSH BUTTON SIZE:2, M06X50 PLASTIC, RED RAL3020,, COMP:STAINLESS STEEL, COMP:BLACK GREY

FLÜGELGRIFF M06 A=50, H=24, FORM:K, WING GRIP M06, A=50 THERMOPLASTIC,, BLACK GREY RAL7021, COMP:STEEL,, COMP:YELLOW RAL1021

VIERSTERNGRIFF FLACH M10X40 D1=76,2 PALM GRIP FLAT M10X40, FORM:L, THERMOPLASTIC, COMP:STEEL, D3=76,20,

PENDELAUFLAGE MIT O-RING M10X50, FORM:P SELF-ALIGNING PADS WITH O-RING M10X50,, FORM:P CARBON STEEL, ADJUSTABLE,, COMP:POLYURETHANE, SW=17

AUFLAGEBOLZEN M12 H=25, FORM:B REST PAD M12 H=25, FORM:B CARBON STEEL,, T=19,

GELENKFUß, D=19, H=23, SW=17, SWIVEL FOOT M10 D1=19 H=23 FREE-CUTTING, STEEL, SW=17,

MONTAGESCHLÜSSEL, VPE=1 ASSEMBLY KEY, PU=1, ,

FEDERNDES DRUCKSTÜCK STANDARD SPRING PLUNGER WITH HEAD D=M08 L=21, STAINLESS STEEL, COMP:BALL STAINLESS, STEEL, PU=5

ARRETIERBOLZEN MIT RASTNUT GR.9 M08 INDEXING PLUNGER SIZE:9 M08 STEEL,, BLUE-PASSIVATED, D=5,

ARRETIERBOLZEN MIT RASTNUT GR.3, FORM:M INDEXING PLUNGER SIZE:3, FORM:M, STAINLESS STEEL, NOT HARDENED,, COMP:THERMOPLASTIC, D1=18, D=8

ZENTRIERSPANNER SECHSKANT, FORM:B, CENTRING CLAMP HEXAGON, FORM:B STEEL, D, =86,5, D=102,5,

FEDERNDES SEITENDRUCKST., STANDARD LATERAL SPRING PLUNGER WITHOUT SEAL, D1=6 D=10 ALUMINIUM, COMP:STEEL, D2=10, L1=11

MUTTER FÜR T-NUT M16 EDELSTAHL, BLANK, NUT FOR T-SLOT M16 STAINLESS STEEL,, BRIGHT, DIN 508, BT=18,

KUGELDRUCKSCHRAUBE OHNE KOPF M08, BALL-END THRUST SCREW WITHOUT HEAD M08,, FORM:B CARBON STEEL, COMP:BALL-BEARING, STEEL L2=60,3

KUGELDRUCKSCHRAUBE OHNE KOPF M05, BALL-END THRUST SCREW WITHOUT HEAD M05,, FORM:E STAINLESS STEEL, COMP:CERAMIC,, L1=12

GEWINDESTIFT MIT DRUCKZAPFEN M06X29, GRUB SCREW WITH THRUST POINT M06, STAINLESS STEEL, DIN6332, L1=35,

EINBAUWERKZEUG STAHL ASSEMBLY TOOL STEEL, ,

STELLRING DIN705, FORM:E GEWINDESTIFT SHAFT COLLAR, FORM:E STEEL, DIN705, 42X63, B=18,

KLEMMHEBEL GR.3 M10X40, KUNSTSTOFF CLAMPING LEVER SIZE:3 M10X40 PLASTIC,, BLACK GREY RAL7021, COMP:STAINLESS STEEL,

KLEMMHEBEL MIT DRUCKKNOPF GR.2 M06X60 CLAMPING LEVER WITH PUSH BUTTON SIZE:2, M06X60 PLASTIC, RED RAL3020,, COMP:STAINLESS STEEL, COMP:BLACK GREY

FLÜGELGRIFF M06X20 A=50, H=24, FORM:L, WING GRIP M06X20, A=50 THERMOPLASTIC,, BLACK GREY RAL7021, COMP:STEEL,, COMP:YELLOW RAL1021

VIERSTERNGRIFF FLACH M10X50 D1=76,2 PALM GRIP FLAT M10X50, FORM:L, THERMOPLASTIC, COMP:STEEL, D3=76,20,

PENDELAUFLAGE MIT O-RING M12X20, FORM:P SELF-ALIGNING PADS WITH O-RING M12X20,, FORM:P CARBON STEEL, ADJUSTABLE,, COMP:POLYURETHANE, SW=19

AUFLAGEBOLZEN M12 H=50, FORM:B REST PAD M12 H=50, FORM:B CARBON STEEL,, T=19,

GELENKFUß, D=22, H=25,5, SW=19, SWIVEL FOOT M12 D1=22 H=25,5, FREE-CUTTING STEEL, SW=19,

MONTAGESCHLÜSSEL, VPE=1 ASSEMBLY KEY, PU=1, ,

FEDERNDES DRUCKSTÜCK STANDARD SPRING PLUNGER WITH HEAD D=M10 L=26, FREE-CUTTING STEEL, COMP:BALL STEEL,, PU=10

ARRETIERBOLZEN OHNE RASTNUT GR.0 M08X1, INDEXING PLUNGER SIZE:0 M08X1, FORM:E, STAINLESS STEEL, HARDENED, D=4,

ARRETIERBOLZEN MIT RASTNUT GR.4, FORM:M INDEXING PLUNGER SIZE:4, FORM:M, STAINLESS STEEL, NOT HARDENED,, COMP:THERMOPLASTIC, D1=22, D=10

PRÄZISIONS-ARRETIERBOLZEN OHNE RASTNUT, PRECISION INDEXING PLUNGE HARDENED,, FORM:A STEEL, CONICAL,, COMP:THERMOPLASTIC, D3=16, D=10

FEDERNDES SEITENDRUCKST., STANDARD LATERAL SPRING PLUNGER WITHOUT SEAL, D1=8 D=12 ALUMINIUM, COMP:STEEL, D2=12, L1=13

MUTTER FÜR T-NUT VERGÜTUNGSSTAHL, NUT FOR T-SLOT CARBON STEEL, BLANK, BT=6, ,

KUGELDRUCKSCHRAUBE OHNE KOPF M08, BALL-END THRUST SCREW WITHOUT HEAD M08,, FORM:B CARBON STEEL, COMP:BALL-BEARING, STEEL L2=80,3

KUGELDRUCKSCHRAUBE OHNE KOPF M05, BALL-END THRUST SCREW WITHOUT HEAD M05,, FORM:E STAINLESS STEEL, COMP:CERAMIC,, L1=20

GEWINDESTIFT MIT DRUCKZAPFEN M06X34, GRUB SCREW WITH THRUST POINT M06, STAINLESS STEEL, DIN6332, L1=40,

EINBAUWERKZEUG STAHL ASSEMBLY TOOL STEEL, ,

STELLRING DIN705, FORM:E GEWINDESTIFT SHAFT COLLAR, FORM:E STAINLESS STEEL,, DIN705 42X63, B=18,

KLEMMHEBEL GR.3 M10X50, KUNSTSTOFF CLAMPING LEVER SIZE:3 M10X50 PLASTIC,, BLACK GREY RAL7021, COMP:STAINLESS STEEL,

KLEMMHEBEL MIT DRUCKKNOPF GR.2 M08 CLAMPING LEVER WITH PUSH BUTTON SIZE:2, M08 PLASTIC, RED RAL3020,, COMP:STAINLESS STEEL, COMP:BLACK GREY

FLÜGELGRIFF M06X30 A=50, H=24, FORM:L, WING GRIP M06X30, A=50 THERMOPLASTIC,, BLACK GREY RAL7021, COMP:STEEL,, COMP:YELLOW RAL1021

VIERSTERNGRIFF FLACH M12 D1=76,2 PALM GRIP FLAT M12, FORM:K, THERMOPLASTIC, COMP:BRASS, D3=76,20,

PENDELAUFLAGE MIT O-RING M12X40, FORM:P SELF-ALIGNING PADS WITH O-RING M12X40,, FORM:P CARBON STEEL, ADJUSTABLE,, COMP:POLYURETHANE, SW=19

AUFLAGEBOLZEN M16 H=30, FORM:B REST PAD M16 H=30, FORM:B CARBON STEEL,, T=24,

GELENKFUß, D=25, H=29,5, SW=24, SWIVEL FOOT M16 D1=25 H=29,5, FREE-CUTTING STEEL, SW=24,

MONTAGESCHLÜSSEL, VPE=1 ASSEMBLY KEY, PU=1, ,

FEDERNDES DRUCKSTÜCK STANDARD SPRING PLUNGER WITH HEAD D=M10 L=26, STAINLESS STEEL, COMP:BALL STAINLESS, STEEL, PU=5

ARRETIERBOLZEN OHNE RASTNUT GR.1 M10X1, INDEXING PLUNGER SIZE:1 M10X1, FORM:E, STAINLESS STEEL, HARDENED, D=5,

ARRETIERBOLZEN OHNE RASTNUT GR.3, INDEXING PLUNGER SIZE:3, FORM:L STEEL,, HARDENED, COMP:THERMOPLASTIC, D1=18, D=8,

PRÄZISIONS-ARRETIERBOLZEN OHNE RASTNUT, PRECISION INDEXING PLUNGE HARDENED,, FORM:A STEEL, CONICAL,, COMP:THERMOPLASTIC, D3=20, D=12

FEDERNDES SEITENDRUCKST., STANDARD LATERAL SPRING PLUNGER WITHOUT SEAL, D1=8 D=12 ALUMINIUM, COMP:STEEL, D2=12, L1=13

MUTTER FÜR T-NUT VERGÜTUNGSSTAHL, NUT FOR T-SLOT CARBON STEEL, BLANK, BT=8, ,

KUGELDRUCKSCHRAUBE OHNE KOPF M10, BALL-END THRUST SCREW WITHOUT HEAD M10,, FORM:B CARBON STEEL, COMP:BALL-BEARING, STEEL L2=12,3

KUGELDRUCKSCHRAUBE OHNE KOPF M05, BALL-END THRUST SCREW WITHOUT HEAD M05,, FORM:E STAINLESS STEEL, COMP:CERAMIC,, L1=8

GEWINDESTIFT MIT DRUCKZAPFEN M06X44, GRUB SCREW WITH THRUST POINT M06, STAINLESS STEEL, DIN6332, L1=50,

EINBAUWERKZEUG STAHL ASSEMBLY TOOL STEEL, ,

STELLRING DIN705, FORM:E GEWINDESTIFT SHAFT COLLAR, FORM:E STEEL, DIN705, 45X70, B=18,

KLEMMHEBEL GR.3 M10X60, KUNSTSTOFF CLAMPING LEVER SIZE:3 M10X60 PLASTIC,, BLACK GREY RAL7021, COMP:STAINLESS STEEL,

KLEMMHEBEL MIT DRUCKKNOPF GR.2 M08X15 CLAMPING LEVER WITH PUSH BUTTON SIZE:2, M08X15 PLASTIC, RED RAL3020,, COMP:STAINLESS STEEL, COMP:BLACK GREY

FLÜGELGRIFF M06X40 A=50, H=24, FORM:L, WING GRIP M06X40, A=50 THERMOPLASTIC,, BLACK GREY RAL7021, COMP:STEEL,, COMP:YELLOW RAL1021

FÜNFSTERNGRIFF M05 D1=40 H=27,7, FORM:K FIVE LOBE GRIP M05, FORM:K, THERMOPLASTIC, COMP:BRASS, D3=40,

PENDELAUFLAGE MIT O-RING M12X60, FORM:P SELF-ALIGNING PADS WITH O-RING M12X60,, FORM:P CARBON STEEL, ADJUSTABLE,, COMP:POLYURETHANE, SW=19

AUFLAGEBOLZEN M16 H=60, FORM:B REST PAD M16 H=60, FORM:B CARBON STEEL,, T=24,

GELENKFUß, D=32, H=36, SW=30, SWIVEL FOOT M20 D1=32 H=36 FREE-CUTTING, STEEL, SW=30,

MONTAGESCHLÜSSEL, VPE=1 ASSEMBLY KEY, PU=1, ,

FEDERNDES DRUCKSTÜCK STANDARD SPRING PLUNGER WITH HEAD D=M12 L=32, FREE-CUTTING STEEL, COMP:BALL STEEL,, PU=10

ARRETIERBOLZEN OHNE RASTNUT GR.2 INDEXING PLUNGER SIZE:2 M12X1,5, FORM:E, STAINLESS STEEL, HARDENED, D=6,

ARRETIERBOLZEN OHNE RASTNUT GR.1, INDEXING PLUNGER SIZE:1, FORM:N, STAINLESS STEEL, NOT HARDENED,, COMP:THERMOPLASTIC, D1=12, D=5

PRÄZISIONS-ARRETIERBOLZEN OHNE RASTNUT, PRECISION INDEXING PLUNGE HARDENED,, FORM:A STEEL, CONICAL,, COMP:THERMOPLASTIC, D3=25, D=16

FEDERNDES SEITENDRUCKST., STANDARD LATERAL SPRING PLUNGER WITHOUT SEAL, D1=8 D=12 ALUMINIUM, COMP:STEEL, D2=12, L1=13

MUTTER FÜR T-NUT VERGÜTUNGSSTAHL, NUT FOR T-SLOT CARBON STEEL, BLANK,, BT=10,

KUGELDRUCKSCHRAUBE OHNE KOPF M10, BALL-END THRUST SCREW WITHOUT HEAD M10,, FORM:B CARBON STEEL, COMP:BALL-BEARING, STEEL L2=16,3

KUGELDRUCKSCHRAUBE OHNE KOPF M06, BALL-END THRUST SCREW WITHOUT HEAD M06,, FORM:E STAINLESS STEEL, COMP:CERAMIC,, L1=10,8

GEWINDESTIFT MIT DRUCKZAPFEN M06X24, GRUB SCREW WITH THRUST POINT M06 STEEL,, DIN6332, L1=30,

EINBAUWERKZEUG STAHL ASSEMBLY TOOL STEEL, ,

STELLRING DIN705, FORM:E GEWINDESTIFT SHAFT COLLAR, FORM:E STAINLESS STEEL,, DIN705 45X70, B=18,

KLEMMHEBEL GR.3 M10 KUNSTSTOFF, ORANGE CLAMPING LEVER SIZE:3 M10 PLASTIC,, ORANGE RAL2004, COMP:STAINLESS STEEL,

KLEMMHEBEL MIT DRUCKKNOPF GR.2 M08X20 CLAMPING LEVER WITH PUSH BUTTON SIZE:2, M08X20 PLASTIC, RED RAL3020,, COMP:STAINLESS STEEL, COMP:BLACK GREY

FLÜGELGRIFF M06X20 A=50, H=24, FORM:L, WING GRIP M06X20, A=50 THERMOPLASTIC,, BLACK GREY RAL7021, COMP:STEEL,, COMP:BLACK GREY RAL7021

FÜNFSTERNGRIFF M06 D1=40 H=27,7, FORM:K FIVE LOBE GRIP M06, FORM:K, THERMOPLASTIC, COMP:BRASS, D3=40,

PENDELAUFLAGE MIT O-RING M16X25, FORM:P SELF-ALIGNING PADS WITH O-RING M16X25,, FORM:P CARBON STEEL, ADJUSTABLE,, COMP:POLYURETHANE, SW=24

AUFLAGEBOLZEN M06 H=12,5, FORM:C REST PAD M06 H=12,5, FORM:C CARBON, STEEL, T=11,

AUFLAGEBOLZEN D1=5 H=10 EINSATZSTAHL REST PAD D1=5 H=10 MILD STEEL, ,

FEDERNDES DRUCKSTÜCK STANDARD SPRING PLUNGER STANDARD SPRING FORCE, M03 L=10 STEEL, COMP:PIN POM, PU=25,

FEDERNDES DRUCKSTÜCK STANDARD SPRING PLUNGER WITH HEAD D=M12 L=32, STAINLESS STEEL, COMP:BALL STAINLESS, STEEL, PU=5

ARRETIERBOLZEN OHNE RASTNUT GR.3 INDEXING PLUNGER SIZE:2 M16X1,5, FORM:E, STAINLESS STEEL, HARDENED, D=8,

ARRETIERBOLZEN OHNE RASTNUT GR.2, INDEXING PLUNGER SIZE:2, FORM:N, STAINLESS STEEL, NOT HARDENED,, COMP:THERMOPLASTIC, D1=14, D=6

PRÄZISIONS-ARRETIERBOLZEN OHNE RASTNUT, PRECISION INDEXING PLUNGE HARDENED,, FORM:A STEEL, CONICAL,, COMP:THERMOPLASTIC, D3=30, D=20

FEDERNDES SEITENDRUCKST., STANDARD LATERAL SPRING PLUNGER WITHOUT SEAL, D1=10 D=16 ALUMINIUM, COMP:STEEL, D2=16, L1=17

MUTTER FÜR T-NUT VERGÜTUNGSSTAHL, NUT FOR T-SLOT CARBON STEEL, BLANK,, BT=12,

KUGELDRUCKSCHRAUBE OHNE KOPF M10, BALL-END THRUST SCREW WITHOUT HEAD M10,, FORM:B CARBON STEEL, COMP:BALL-BEARING, STEEL L2=20,3

KUGELDRUCKSCHRAUBE OHNE KOPF M06, BALL-END THRUST SCREW WITHOUT HEAD M06,, FORM:E STAINLESS STEEL, COMP:CERAMIC,, L1=16,8

GEWINDESTIFT MIT DRUCKZAPFEN M06X29, GRUB SCREW WITH THRUST POINT M06 STEEL,, DIN6332, L1=35,

EINBAUWERKZEUG STAHL ASSEMBLY TOOL STEEL, ,

STELLRING DIN705, FORM:E GEWINDESTIFT SHAFT COLLAR, FORM:E STEEL, DIN705, 48X70, B=18,

KLEMMHEBEL GR.3 M10X20, KUNSTSTOFF CLAMPING LEVER SIZE:3 M10X20 PLASTIC,, ORANGE RAL2004, COMP:STAINLESS STEEL,

KLEMMHEBEL MIT DRUCKKNOPF GR.2 M08X25 CLAMPING LEVER WITH PUSH BUTTON SIZE:2, M08X25 PLASTIC, RED RAL3020,, COMP:STAINLESS STEEL, COMP:BLACK GREY

FLÜGELGRIFF M06X30 A=50, H=24, FORM:L, WING GRIP M06X30, A=50 THERMOPLASTIC,, BLACK GREY RAL7021, COMP:STEEL,, COMP:BLACK GREY RAL7021

FÜNFSTERNGRIFF M06X15 D1=40 H=27,7, FIVE LOBE GRIP M06X15, FORM:L, THERMOPLASTIC, COMP:STEEL, D3=40,

PENDELAUFLAGE MIT O-RING M16X50, FORM:P SELF-ALIGNING PADS WITH O-RING M16X50,, FORM:P CARBON STEEL, ADJUSTABLE,, COMP:POLYURETHANE, SW=24

AUFLAGEBOLZEN M06 H=25, FORM:C REST PAD M06 H=25, FORM:C CARBON STEEL,, T=11,

AUFLAGEBOLZEN D1=5 H=12 EINSATZSTAHL REST PAD D1=5 H=12 MILD STEEL, ,

FEDERNDES DRUCKSTÜCK STANDARD SPRING PLUNGER STANDARD SPRING FORCE, M04 L=15 STEEL, COMP:PIN POM, PU=25,

FEDERNDES DRUCKSTÜCK STANDARD SPRING PLUNGER SMOOTH VERSION D=2,5 L=6, BRASS, DOUBLE SIDED, COMP:BALL, STAINLESS STEEL, PU=25

ARRETIERBOLZEN OHNE RASTNUT GR.4 INDEXING PLUNGER SIZE:4 M20X1,5, FORM:E, STAINLESS STEEL, HARDENED, D=10,

ARRETIERBOLZEN OHNE RASTNUT GR.3, INDEXING PLUNGER SIZE:3, FORM:N, STAINLESS STEEL, NOT HARDENED,, COMP:THERMOPLASTIC, D1=18, D=8

PRÄZISIONS-ARRETIERBOLZEN OHNE RASTNUT, PRECISION INDEXING PLUNGE HARDENED,, FORM:A STEEL, CONICAL,, COMP:THERMOPLASTIC, D3=38, D=25

FEDERNDES SEITENDRUCKST., STANDARD LATERAL SPRING PLUNGER WITHOUT SEAL, D1=10 D=16 ALUMINIUM, COMP:STEEL, D2=16, L1=17

MUTTER FÜR T-NUT VERGÜTUNGSSTAHL, NUT FOR T-SLOT CARBON STEEL, BLANK,, BT=14,

KUGELDRUCKSCHRAUBE OHNE KOPF M10, BALL-END THRUST SCREW WITHOUT HEAD M10,, FORM:B CARBON STEEL, COMP:BALL-BEARING, STEEL L2=25,3

KUGELDRUCKSCHRAUBE OHNE KOPF M06, BALL-END THRUST SCREW WITHOUT HEAD M06,, FORM:E STAINLESS STEEL, COMP:CERAMIC,, L1=20,8

GEWINDESTIFT MIT DRUCKZAPFEN M06X34, GRUB SCREW WITH THRUST POINT M06 STEEL,, DIN6332, L1=40,

EINBAUWERKZEUG STAHL ASSEMBLY TOOL STEEL, ,

STELLRING DIN705, FORM:E GEWINDESTIFT SHAFT COLLAR, FORM:E STAINLESS STEEL,, DIN705 48X70, B=18,

KLEMMHEBEL GR.3 M10X25, KUNSTSTOFF CLAMPING LEVER SIZE:3 M10X25 PLASTIC,, ORANGE RAL2004, COMP:STAINLESS STEEL,

KLEMMHEBEL MIT DRUCKKNOPF GR.2 M08X30 CLAMPING LEVER WITH PUSH BUTTON SIZE:2, M08X30 PLASTIC, RED RAL3020,, COMP:STAINLESS STEEL, COMP:BLACK GREY

FLÜGELGRIFF M06X40 A=50, H=24, FORM:L, WING GRIP M06X40, A=50 THERMOPLASTIC,, BLACK GREY RAL7021, COMP:STEEL,, COMP:BLACK GREY RAL7021

FÜNFSTERNGRIFF M06X20 D1=40 H=27,7, FIVE LOBE GRIP M06X20, FORM:L, THERMOPLASTIC, COMP:STEEL, D3=40,

PENDELAUFLAGE MIT O-RING M16X80, FORM:P SELF-ALIGNING PADS WITH O-RING M16X80,, FORM:P CARBON STEEL, ADJUSTABLE,, COMP:POLYURETHANE, SW=24

AUFLAGEBOLZEN M08 H=15, FORM:C REST PAD M08 H=15, FORM:C CARBON STEEL,, T=13,

AUFLAGEBOLZEN D1=5 H=16 EINSATZSTAHL REST PAD D1=5 H=16 MILD STEEL, ,

FEDERNDES DRUCKSTÜCK STANDARD SPRING PLUNGER STANDARD SPRING FORCE, M05 L=18 STEEL, COMP:PIN POM, PU=25,

FEDERNDES DRUCKSTÜCK STANDARD SPRING PLUNGER SMOOTH VERSION D=3 L=8, BRASS, DOUBLE SIDED, COMP:BALL, STAINLESS STEEL, PU=25

We can compile your order
according to your purchasing list.

This service offers more comfort for our customers. Just upload the list of equipment you need.

Introduce yourself

Enter your name

Contact number

Enter your contact phone number.

Email

Enter your email address

Address

Preferred manufacturers separated by commas

Attach your list of purchase

Add a comment about your order

By clicking "Submit a request", you agree to the Terms of Use and our Privacy Policy

To the top of the page

Send a request

We will contact with you and answer to all your questions

Introduce yourself

Enter your name

Contact number

Enter your contact phone number.

Email

Enter your email address

Address

Preferred manufacturers separated by commas

Attach your list of purchase

Add a comment about your order

By clicking "Submit a request", you agree to the Terms of Use and our Privacy Policy

Go to mobile version